By

Octava HDCATIR-RX-UK HDMI CAT5/6 Receiver are designed to handle full 1080p up to 130ft and 1080i/720p up to 200ft,

Octava HDCATIR-RX-UK HDMI CAT5/6 Receiver  Module is compatible with 38KHz infrared receiver module, it can receive standard 38KHz modulation remote control signal . It supports carrier frequencies from 36kHz up to 40kHz and IR command sets up to 48 bits plus header and tail bit and Infrared 3.5mm socket for plugging in the extension cable of IR blaster. Connect the HDCATIR-RX-UK via 2 x CAT5e or CAT6 cables to any of the dual RJ45 Outputs of the Matrix and deliver HDMI (Video and Audio) to the remote Zone plus send IR back to your Source device via the Matrix. HDMI 1.3 compliant and 3D Ready for use with Blu-ray 3D and SKY+ HD 3D. HDMI CAT5/6 Receiver  unit sports screw down lugs to enable secure installation in AV Racks or behind Source and Display equipment. The HDMI CAT5/6 Receiver  unit is externally powered avoiding any possible problems due to power starvation on the HDMI 5v signal bus. The HDMI Extenders are designed to handle full 1080p up to 130ft and 1080i/720p up to 200ft, allows users not only send IR signals from remote location but also to remote location from a control system. The HDMI CAT5/6 Receiver support Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM.

Specifications

  • HDMI In/Out Connectors: 19 pin HDMI Female Type A
  • HDMI Outputs: 1
  • Infared IR Port: 1 (38KHz – 60Khz)
  • Ethernet cables required: 2
  • Data Rate Support: 10.2 Gbps
  • HDCP pass thru: Yes
  • Video Resolution: 480p, 720i/p, 1080i/p

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

SEO Powered by Platinum SEO from Techblissonline