The HDMI Extenders automatically adjust and compensate for cable
The Cablesson HDelity HDMI Extender are based on the latest HDMI technology and therefore are capable of fully supporting HDCP 2.0, Deep Colour and DTS-HD or Dolby TrueHD audio such as Dolby True HD, DTS-master. These HDelity units are interconnected with CAT5e/CAT6 cabling . ThisCAT5e/6 HDMI Receiver / Extendercan be used with HDelity units to provide a cascaded, long distance HDMI installation. Ideal for public signage, demonstration and presentation applications. The HDelity AVEC Media Centre includes two units Local (TX) and Remote(RX). The TX is linked up to the source and RX is is connected to the Display. Allowing you to extend HDMI, RS232, IR and Ethernet peripherals up to 100 metres (328 feet) apart without any signal degrading. The HDelity HDMI Extender are low powered and can be attached to the display end ( after the long cable) to completely rectify any errors caused by transmission over long HDMI cable. The extender is housed in a small ease to use package. Power for the Hdmi Extenders is supplied directly from the HDMI source so you do not require en external power source. An external HDMI Extender can be used in order to correct and compensate for the long cables that causes the impairments. The HDMI Extenders automatically adjust and compensate for cable attenuation up to 40 dB. Key Features Supports HDMI v1.4 with 3D & CEC function Support Un-compression video 1080p transfer Supports 12Gbps special RJ45 Giga Link Port Supports all frequency band hardware Infrared rays signal feature Supports 10/100 base-T Ethernet switcher Supports 10.2Gbps HD source signal switcher Support standard CAT5e UTP/STP link cable Support standard CAT6 FTP link cable Provide over 100 meter distance signal link withPower. Fully compliant with HDCP Fully compliant with HDMI v1.2, v1.3 and v1.4 standards Extremely easy to install Support green power feature No any software required.